YT-18900 Hydraulic hole punch 22-60 mm for sheets up to 3 mm
Description
Designed for cutting round holes from 22 to 60 mm in diameter in steel sheets, stainless sheets and non-ferrous metals
Thickness of cut material, depending on its type, up to 3 mm
Pressure on the material during cutting is about 6 t
Used in the manufacture of distribution cabinets for installing boxes or switches
Head rotates through 360 degrees
When cutting holes the sheet surface is not deformed or damaged
Contents:
- dies and punches cutting holes of diameter 22, 27.5, 34, 43, 49, 60 mm
- 2 adapters for mounting 7/16"x3/4" and 3/4"x3/4"
- hand drive
- 1 set of seals
All packed in a case
Thickness of cut material, depending on its type, up to 3 mm
Pressure on the material during cutting is about 6 t
Used in the manufacture of distribution cabinets for installing boxes or switches
Head rotates through 360 degrees
When cutting holes the sheet surface is not deformed or damaged
Contents:
- dies and punches cutting holes of diameter 22, 27.5, 34, 43, 49, 60 mm
- 2 adapters for mounting 7/16"x3/4" and 3/4"x3/4"
- hand drive
- 1 set of seals
All packed in a case
| Weight, kg | 5.94 |
Other items in this section
