UT71B Intelligent multimeter True RMS 10 A, 1000 V, temp. measurement

Measuring method: True RMS in the frequency range up to 100 kHz
3-line digital display
Main display count: 20,000 counts
Secondary displays count: 2000 counts
Graphical analogue scale: 40 segments
Auto-ranging
Manual range selection possible
DC voltage: from 0.01 mV to 1000 V (±0.05% ±5)
AC voltage: from 0.1 mV to 1000 V (±0.6% ±40)
DC current: from 0.01 µA to 10 A (±0.15% ±20)
AC current: from 0.01 µA to 10 A (±0.8% ±15)
Resistance: from 0.01 Ohm to 20 MOhm (±0.4% ±20)
Capacitance: from 1 pF to 20,000 µF (±1.2% ±20)
Frequency: from 0.001 Hz to 200 MHz (±0.1% ±15)
Duty cycle (1/duty ratio): 10% … 90%
Temperature: from -40°C to 1000°C (±1% ±30)
AC current and voltage measurements taking the DC component into account
Continuity buzzer: signal at resistance below ~40 Ohm
Diode test: 2.8 V
Current loop: 4-20 mA (±1% ±50)
USB interface with optical isolation for data transfer
PC software
Display hold (HOLD)
Measurement of maximum, minimum and average values
Peak value hold (PEAK HOLD)
Relative measurement mode
Internal data memory: 100 readings
Adjustable auto power-off time: 10 min/20 min/30 min/Off
Two-level display backlight with adjustable time
Input impedance: 10 MOhm, for the 200 mV range ~ 2.5 GOhm
Display update rate:
- graphical scale - 10 times per second
- digital displays - 2-3 times per second
Overload indication: "OL" symbol on the LCD display
Battery low indicator
Maximum permissible voltage: 1000 V
Fuses: 0.5 A/250 V and 10 A/250 V fusible, fast-acting
Power supply: 1 pc x 9 V battery, type 6F22
Contents:
- instrument, battery, test probes, screw-on crocodile clips, probes with crocodile clips, type K thermocouple
- USB cable
- operating instructions
- carrying case

Warranty against manufacturing defects, including measurement accuracy and successful passing of Uzstandart metrological verification: 12 months