YT-73092 Clamp multimeter True RMS 600 V 600 A

True RMS - measurement of true root-mean-square AC voltage, ensuring accurate readings even with a non-sinusoidal (distorted) signal

Maximum diameter of cable measured by current clamps 18 mm

Automatic measurement range selection
Alternating current (A.C.) up to 600 A (True RMS)

Alternating voltage (A.C.) up to 600 V (True RMS), LoZ, VFD
Direct voltage (D.C.) up to 600 V, VFD
Low input impedance voltage measurement mode (LoZ) to exclude induced ("ghost") voltage
Variable frequency drive voltage measurement mode (VFD)

Resistance up to 60 MOhm

Capacitor capacitance 0–20 mF

Frequency: 0–60 MHz

Diode test: current (I_{F}) = 1 mA, voltage (U_{R}) = 2.3 V

Continuity: audible signal trips at resistance below 60 Ohm (overall test range 0–120 Ohm)
Non-contact voltage detection (NCV): inductive search for a live phase or hidden wiring.

Digital LCD display with backlight
HOLD — freeze current reading on screen
Sampling frequency: 2.5–3 times per second
Auto shut-off after 15 minutes of inactivity. Low charge indicator

Power 2 AAA batteries (1.5 V)
Dimensions: 191 × 70 × 31 mm
Weight 190 grams
Operating temperature: from 0 to +40 °C

Important manufacturer note: Current measurement with clamps must be done strictly on one conductor (one wire). If you clamp a whole multi-core cable (with both phase and neutral), the instrument will give zero or incorrect result due to mutual compensation of magnetic fields

Verification is not included in the price Why?
Warranty for manufacturing defects, including measurement accuracy and successful metrological verification by Uzstandard: 12 months