HT-1005 Hardness tester with printer 17.9–69.5 HRC

Designed for all materials except aluminium:
- locating cavities in moulds
- bearings and various parts
- checking the condition of high-pressure apparatus, steam generators and other equipment
- heavy workpieces
- installed equipment and permanently assembled parts
- examining the surface of small hollow spaces
- identifying materials in a metal materials store
- rapid testing over a wide range of large workpieces

Measuring range:
- HLD 170–960
- HRC 17.9–69.5
- HB 19–683
- HV 80–1042
- HS 30.6–102.6
- HRA 59.1–88
- HRB 13.5–101.7
Measuring direction 360°

User calibration function
USB2.0 port for computer connection
High-speed thermal printer, paper width 57.5±0.5 mm, reel diameter 30 mm
Robust, compact, portable, highly reliable body design for harsh operating conditions, vibration, impacts and electromagnetic interference.

Main characteristics:
- Large LCD display128×64
- testing at any angle, even upside down.
- support for material "forged steel (steel)"; when using impact device D/DC to test a "forged" specimen the HB value can be read directly
- display of 3 hardness scales from the set HRB, HRC, HRA, HV, HB, HS, HL
- memory for 600 data groups (single measured value, average value, test data, impact direction, impact time, material and hardness scale, etc.)
– indication of upper and lower permissible measuring limits: audible signal if the result value goes outside the limits

6 V NI-MH battery with continuous operating period of at least 200 hours (with backlight off, without printing)
Charger 9 V/500 mA
Battery information shows remaining battery capacity and charge status
Automatic power off to save energy

Size 210 x 85 x 45 mm
Weight about 0.6 kg

Separately supplied with 7 impact tips for different material types

Standard packaging
1 Hardness tester
2 Impact tip type D
3 Standard test block
4 Cleaning brush (I)
5 Small support ring
6 Battery charger 9 V 500 mA
7 Printing paper
8 Manual in English
9 Data Pro software
10 Communication cable
11 Small case

Verification is not included in the price Why?
Warranty for manufacturing defects, including measurement accuracy and successful passing of Uzstandart metrological verification: 12 months