YT-82456 Soldering station 75 W / 200-480°C

Power 75 W
Temperature range 200-480°C, step 1°C
Heat-up time to 350°C about 25 s
ESD-safe

Locking of setting changes with a three-digit password
Temperature stabilisation depending on the size of the soldered element and the soldering area adjusts power supply to the tip to maintain the set temperature
Calibration of the built-in temperature sensor depending on tip wear
The station enters standby mode when the operator is idle from 1 to 240 minutes, reducing the tip working temperature to 200°C to extend its service life
Self-diagnosis after switching on the station power button and, in case of problems, issuing an error message
Saving temperature settings for 3 memory channels. After saving the operator can quickly switch to previously saved settings
Audible ready signalling of the device for work at the set temperature with a single beep

Large clear 3.5-inch LCD display with adjustable backlight shows:
- set and actual tip temperature;
- device lock function;
- audible alarm function status;
- device sleep mode is active;
- device operating intensity;
- device running on preset settings.

Soldering iron 908D for mounting on a sturdy metal stand
heater operating voltage 24 V
tip type 900M
ceramic heater
cable length 1 m
weight about 100 g

USB port for charging DC5V/1A
On/off button on the front panel
Fuse in the socket
Dimensions 160x120x140 mm