ИП-2009 Pneumatic end sander 63 mm

In most cases the straight die grinder IP-2009 is used for prolonged work in harsh conditions. Cleaning, grinding and polishing of metal surfaces is the purpose of the tool.

Cleaning weld seams with the IP2009 pneumatic die grinder will be much easier, because the tool is fitted with a convenient trigger system. A reinforced body made from durable material and good build quality will substantially extend the working life of the die grinder.

The IP-2009 will let you easily clean the required part of the metal or polish and clean any other material. Die grinders of this brand are used both at large plants and in small mechanical workshops and welding shops.

Technical specifications:
Type straight
Working surface 63mm / 20mm

Please note:
IMPORTANT: Before you decide to buy any pneumatic tool, we remind you that a pneumatic tool uses compressed air as its energy carrier, therefore under no circumstances may a pneumatic tool under pressure be repaired. For normal operation of a pneumatic tool an air compressor with a certain delivery rate and compressed-air pressure is required.

Using a compressor with a lower delivery rate or a lower working pressure than stated in the tool passport leads to loss of pneumatic-tool power and consequently to loss of labour productivity. Loss of power is also caused by using air hoses of smaller diameter than required and of greater length than necessary. Excess compressed-air pressure may lead to premature failure of the pneumatic tool or to its destruction, and in some cases to injuries of varying degree of danger to life. Excess compressor delivery is not a critical parameter and only entails additional energy costs.

Absence or incorrect connection of air preparation systems as a rule adversely affects the service life of the pneumatic tool. In most cases, for normal operation of a pneumatic tool, lubricators are required that enrich the compressed air with atomised oil to reduce friction in the rubbing parts of the pneumatic motor, impact or impact-rotary mechanism.

Violation of these rules leads to premature failure of the pneumatic tool, and incorrect operation does not entitle the user to WARRANTY REPAIR.