YT-730933 Clamp multimeter TrueRMS 1000 V(750 V)/1000 A
Description
True RMS - measurement of the true root-mean-square value of AC voltage, which guarantees accurate readings even with a non-sinusoidal (distorted) signal
Non-contact detection of AC voltage by the inductive NCV method
Inrush current measurement with the clamp meter 80 ms after the device is started
Phase presence measurement (probe function)
Automatic measuring range adjustment AUTO
Manual measuring range change RAN
Saving the current measured value on the display DATA HOLD
LINE – contact detection of AC voltage, works like a traditional tester. After inserting the test probe into the socket hole, if a phase is present, four lines appear on the display, the signal diode lights up and an intermittent beep sounds
LCD display, maximum displayed result 6000
Backlight of the screen and the clamp measuring field
Audible signal during continuity test at resistance below 50 Ohm
Jaw opening up to 25 mm
Test probes 14 cm long, length with cable 103 cm
Auto power off 15 minutes
Low battery indicator
Power supply three 1.5 V batteries (AAA)
Contents:
instrument
probes
thermocouple
case
strap
multilingual instructions (incl. Russian)
warranty card
Verification is not included in the price Why?
Warranty for manufacturing defects, including measurement accuracy and successful passing of Uzstandart metrological verification: 12 months
Non-contact detection of AC voltage by the inductive NCV method
Inrush current measurement with the clamp meter 80 ms after the device is started
Phase presence measurement (probe function)
Automatic measuring range adjustment AUTO
Manual measuring range change RAN
Saving the current measured value on the display DATA HOLD
LINE – contact detection of AC voltage, works like a traditional tester. After inserting the test probe into the socket hole, if a phase is present, four lines appear on the display, the signal diode lights up and an intermittent beep sounds
LCD display, maximum displayed result 6000
Backlight of the screen and the clamp measuring field
Audible signal during continuity test at resistance below 50 Ohm
Jaw opening up to 25 mm
Test probes 14 cm long, length with cable 103 cm
Auto power off 15 minutes
Low battery indicator
Power supply three 1.5 V batteries (AAA)
Contents:
instrument
probes
thermocouple
case
strap
multilingual instructions (incl. Russian)
warranty card
Verification is not included in the price Why?
Warranty for manufacturing defects, including measurement accuracy and successful passing of Uzstandart metrological verification: 12 months
| Weight, kg | 0.554 |
| Capacity | 0-100 mF |
| AC voltage, V | 0-750 TRUE RMS (±1%) |
| DC voltage, V | 0-1000 (±0.5%) |
| Transistor test, hFE | 2 мА, 3,2 В |
| Continuity test | 0-50 Ohm |
| Resistance | 0 - 60 (±1.5%) |
| Temperature, °C | -30-1000 (±2.5%) |
| AC current, A | 1000 (±2%) TRUE RMS |
| DC current, A | 1000 (±2%) |
| Frequency, Hz | 0-10 MHz |
Other items in this section
