YT-0762 Digital torque wrench with memory 1/2" 10-200 Nm

2 operating modes:
1. peak (accuracy clockwise, counterclockwise - ±1% and ±2%). The screen shows the maximum measurement result achieved, which can be saved
2. tracking (accuracy clockwise, counterclockwise - ±2% and ±3%). The screen shows the current force, it cannot be saved

To switch between peak mode and tracking mode, you need to:
1) press and hold the U button, the inscription MODE will appear
2) briefly press U, the name of the current mode will appear - peak or trace
3) press the up or down button to change the mode
4) press U to confirm the mode selection

Saving measurement results (memory for 500 values)
When working in peak mode, after the measurement is completed, press the C button
Flashing 8s will appear on the screen, which will disappear after the recording process is completed

Viewing measurement results
1) press and hold the U button, the inscription MODE will appear
2) press the up or down button until the inscription DAE appears
3) press U. In flashing mode the sequence number of the last record and the saved value will be displayed
4) press the up or down button to view other saved data

In tracking mode, LED light indication of the applied force level at 80%, 90%, 100% and 110% of the set value. Audible indication

Screen backlight
Power supply 2 AA size batteries 1.5 V

Contents:
- factory calibration certificate
- instructions in English
- warranty card